毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

超厚玻璃掰边机系统设计+CAXA图纸

时间:2020-03-07 10:48来源:毕业论文
针对8-15mm的超厚浮法玻璃的掰边机械装置以及控制过程进行设计。首先,对玻璃掰边常用的方法进行分析,根据玻璃的特点选择合理的掰玻璃方法。其次,根据设计要求确定合适的掰边

摘要掰边机技术是一门机电一体化控制的综合技术。玻璃掰边机在工业领域中应用非常广泛,推动了工业自动化的发展。本文针对8-15mm的超厚浮法玻璃的掰边机械装置以及控制过程进行设计。首先,对玻璃掰边常用的方法进行分析,根据玻璃的特点选择合理的掰玻璃方法。其次,根据设计要求确定合适的掰边机硬件设备。再次,确定玻璃掰边机需要控制的部件以及他们之间的动作循环过程,分析掰边机的运动步骤,根据生产需要,设计合适的自动控制的方案。确定输入输出信号的个数,选择合适的可编程控制器型号。然后根据自动控制的方案,编写适合的控制程序。46021
毕业论文关键词:掰边机;自动控制;可编程控制器
ABSTRACT
Edge breaking machine technology is a comprehensive technology of mechanical and electrical integration. Glass edge breaking machine is widely used in the industrial field, and it has promoted the development of the industrial automation. In this paper,we will design the edge breaking mechanical devices and control process of the 8-15mm's super thick float glass. Firstly, analysis the common methods of breaking glass, according to the characteristics of the glass to design the performance of breaking the edge of glass. Secondly, according to the design requirements to determine the appropriate edge breaking machine hardware equipment. Thirdly, determine the needs of the glass edge breaking machine’s components and the cycle of action between them, analysis the movement of the edge breaking machine. According to the production needs, design the suitable automatic control program.  Determine the number of the input and output signals, select the appropriate model of Programmable Logic Controller. Then, according to the plan of automatic control, compile the suitable control program.
Key words: edge breaking machine; automation; Programmable Logic Controller
目  录
第一章  绪论    1
1.1玻璃掰边机产生的背景    1
1.2国内玻璃掰边机发展及趋势    1
第二章  超厚玻璃掰边机总体设计    3
2.1 系统设计要求    3
2.2 基本设计思路    3
2.3掰边方式的确定    4
2.4掰边机的组成    4
第三章  机械结构的设计    7
3.1整体结构设计    7
3.2掰边机构设计    7
3.3辊道的设计    8
3.3电机的选择    8
3.4减速机的选择    10
3.5链传动的选择    11
第四章  控制系统的设计    13
4.1 系统硬件设计    13
4.1.1 PLC的选型    13
4.1.2电磁阀及气缸的选型    13
4.1.3传感器的选择    13
4.1.4其他元器件    14
4.1.5电气原理图    15
4.2系统软件设计    15
4.2.1程序流程图    15
4.2.2程序设计    16
结束语    19
致  谢    20
参考文献    21
 第一章  绪论
1.1玻璃掰边机产生的背景
在西方发达国家中,由于长期的市场竞争使得玻璃工业的发展已经有了较为完善的的体制,技术装备水平与其他国家相比更为先进,产品质量更高。发达国家的超厚玻璃的生产在其玻璃生产工业中占有很大的份额,尤其是美国、日本,他们对玻璃产品质量的控制非常严格,均都采用的是远高于国家标准的企业内部标准来控制生产。形成了有自身特点的能稳定生产的硬件设备和软件系统,科学化生产、规范化生产,极大程度上提高了生产率。同时,他们重视用现代技术来进行对传统产业的改造。超厚玻璃生产工业在现代信息和控制技术、新材料研究方面也得到迅速的发展。 超厚玻璃掰边机系统设计+CAXA图纸:http://www.youerw.com/jixie/lunwen_47662.html
------分隔线----------------------------
推荐内容