毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

反后坐装置落锤试验台设计落锤释放机构设计

时间:2018-07-10 17:10来源:毕业论文
确定了落锤释放机构的设计方案,设计一种机械自动脱钩。对落锤释放机构进行功能设计,进行原理分析和运动学分析。然后在功能设计的基础上,对落锤释放机构进行具体的结构设计

摘要:本文主要介绍了落锤释放机构的设计。首先介绍了一下吊具的应用领域,接着说明了设计的任务要求。根据任务要求进行方案的选择,确定了落锤释放机构的设计方案,设计一种机械自动脱钩。对落锤释放机构进行功能设计,进行原理分析和运动学分析。然后在功能设计的基础上,对落锤释放机构进行具体的结构设计,包括钩杆、顶杆、吊钩体等零件的尺寸设计和相关校核工作。最后对本次设计进行了简单的总结。25589
关键词  落锤释放机构  吊具  机械自动脱钩
毕业论文设计说明书外文摘要
Title     The design of a recoil system’s drop test bench        
       ——the design of release mechanism of a drop hammer                      
Abstract
This article mainly introduces the designing process of the drop hammer release
mechanism.The application field of sling is introduced.It illustrates the requirements corresponding to the design task .According to the needs of task scheme,the designing scheme of the release mechanism of drop hammer is selected through a scientific process .The design of a mechanical automatic decoupling mechanism is followed. And then function design,principle analysis and kinematics analysis of the release mechanism of drop hammer is carried out.On the basis of functional design,the concrete structure of drop hammer release mechanism, including the hook rod, plunger, the hook body parts is determined .Finally,it gives a brief summary for this design.
Keywords  Hammer release mechanism  Sling  Mechanical automatic decoupling
目   次
1  绪论    1
1.1  吊具的应用领域    1
1.2  反后坐装置落锤试验台概述    1
1.3  研究内容    1
1.4  研究意义    2
1.5  主要的工作内容    2
2  确定落锤释放机构的设计方案    3
2.1  落锤释放机构可行的方案    3
2.2  落锤释放机构设计方案的确定    5
2.3  本章小结    5
3  落锤释放机构的力学分析    6
3.1  机械自动脱钩系统原理    6
3.2  对机构整体的受力分析    6
3.3  本章小结    10
4  落锤释放机构的技术设计    11
4.1  落锤锤头与钩杆的设计    11
4.2  顶杆的尺寸设计及其稳定性校核    14
4.3  销轴的设计    16
4.4  吊钩体的设计    17
4.5  弹簧的设计    18
4.6  滑块的设计    22
4.7  本章小结    22
5  对零件进行强度分析    23
5.1  SolidWorks软件中的Simulation介绍    23
5.2  模型的导入与应力分析    23
5.3  本章小结    27
总结    28
致谢    29
参考文献    30
1  绪论
1.1  吊具的应用领域
吊具是指起重机械中吊取重物的装置。吊取成件物品最常用的吊具是吊钩,其他的还有起重吸盘、货叉、吊环和夹钳等。吊具被广泛应用于起吊装行业中。
吊具中常用的是吊钩等链式吊具。起重吸盘、夹钳和货叉等可在起重机上作为专用吊具长久使用,也可以作为可更换的辅助吊具挂在吊钩上临时使用,常使用于货种比较多的仓库和堆场,用来提高工作效率。抓取散状物料的吊具一般是颚板可开闭的抓斗,也可用电磁吸盘吸取如金属切屑等导磁性物料。吊取流动性物料的吊具常用的有盛桶和吊罐、一般通过倾侧或抽底塞等方式卸出钢水或化学溶液,通过打开吊罐底门卸出钢水或化学溶液,通过打开吊罐底门卸出混凝土等流动性物料。 反后坐装置落锤试验台设计落锤释放机构设计:http://www.youerw.com/jixie/lunwen_19442.html
------分隔线----------------------------
推荐内容