毕业论文

打赏
当前位置: 毕业论文 > 土木工程 >

D值法南京城南电力分公司综合办公大楼建筑及结构设计

时间:2019-12-21 10:43来源:毕业论文
楼盖双向板采用弹性方法法计算,竖向荷载作用下的框架内力采用分层法计算,水平地震作用下的框架内力采用改进的反弯点法——D值法进行计算。本说明中还对竖向恒荷载作用下框架

摘要本毕业设计为南京市城南电力公司综合办公大楼的建筑设计和结构设计。其中建筑设计完成了1~5层的平面设计,东立面和南立面的立面设计,还有两个出入口的剖面设计,并绘制了相应的建筑施工图。结构设计完成了一层楼盖的结构设计,一榀框架的结构设计,一部主楼梯的结构设计,以及基础的结构设计,并绘制了相应的结构施工图。结构设计中,楼盖双向板采用弹性方法法计算,竖向荷载作用下的框架内力采用分层法计算,水平地震作用下的框架内力采用改进的反弯点法——D值法进行计算。本说明中还对竖向恒荷载作用下框架弯矩进行了电算校核,统计并分析了手算误差。43111

毕业论文关键词  结构设计  框架结构  弹性方法  D值法 电算校核

毕业设计说明书外文摘要

Title    Architectural and Structural Design of a Comprehensive Office Building of a power company in Nanjing           

The graduation project is architectural and structural design of a comprehensive Office building of a power company in Nanjing. This paper finished architectural design 1 to 5 floors, east and south facade design, sectional design of two entrances, and the corresponding construction drawings. Structural design includes first floor design, one frame, the main staircase, foundation design, and the corresponding construction drawings. Among structural design, two-way slab calculated with elastic method. The internal forces of frame under vertical load calculated with layered method, under horizontal earthquake calculated with the improved anti bending point method—— D-value method. Also,the moment of frame under vertical dead load is checked by PKPM, and the errors of hand calculation are counted and analyzed.

Keywords  Structural design  Frame structure  Plastic strand method  D value method  Computer check

目  次

1  引言1

2  建筑设计3

2.1  平面设计3

2.2  剖面和立面设计5

3  结构设计概述7

4  楼盖设计8

4.1  设计参数8

4.2  结构布置8

4.3  荷载计算10

4.4  板的设计11

4.5  次梁设计17

5  框架设计24

5.1  截面尺寸24

5.2  设计参数24

5.3  荷载计算25

5.4  内力计算33

5.5  内力调整45

5.6  内力组合46

5.7  框架梁结构设计60

5.8  框架柱结构设计67

5.9  电算校核75

6  楼梯结构设计78

6.1  设计参数78

6.2  梯段板设计78

6.3  平台板设计79

6.4  平台梁设计82

6.5  梯柱设计84

7  基础设计85

7.1  场地资料85

7.2  设计参数85

7.3  荷载计算88

7.4  基础设计89

7.5  地基梁设计90

结论91

致谢92

参考文献93

 1  引言

本工程为某电力公司综合办公楼,建设地点为江苏南京,总建筑面积约5100m2,主体结构为五层,局部有电梯机房、相邻楼梯间突出屋面,无地下室。建筑正负零绝对标高为16.00m,室内外高差为0.6m,总建筑高度为22.5m(含室内外高差),主体结构层高为3.6m,机房层高为3.3m。

本工程上部结构形式采用现浇钢筋混凝土框架结构,建筑设计使用年限50年,抗震设防烈度为7度,抗震等级为三级。

建设场地位于南京市江宁区,地勘资料显示,场地地势平坦、土质均匀、稳定性好,为Ⅱ类场地。地基基础设计等级为丙级,基础形式采用天然地基上的浅基础。 D值法南京城南电力分公司综合办公大楼建筑及结构设计:http://www.youerw.com/gongcheng/lunwen_43792.html

------分隔线----------------------------
推荐内容