毕业论文

打赏
当前位置: 毕业论文 > 土木工程 >

锡山职业学校实验楼的建筑与结构设计

时间:2018-04-24 20:56来源:毕业论文
完成了三层楼盖的设计、一榀框架的结构设计,以及一部主要楼梯的结构设计,绘制了相应的结构施工图;通过PKPM软件进行了结构的计算机校核,分析误差,并利用其导出数据进行了结

摘要本毕业设计课题为南京某区民办初中部18班教学建筑与结构设计。通过查阅相关资料和建筑设计规范手册,在考虑初中教学楼建筑布局、使用功能以及设计特点的基础上,确定建筑方案,绘制主要平面、立面、剖面的建筑施工图;根据建筑方案进行结构设计,完成了三层楼盖的设计、一榀框架的结构设计,以及一部主要楼梯的结构设计,绘制了相应的结构施工图;通过PKPM软件进行了结构的计算机校核,分析误差,并利用其导出数据进行了结构的基础设计,完成了相应基础施工图的绘制。21758
关键词 框架结构  建筑设计  结构设计  PKPM软件
毕业论文设计说明书(论文)外文摘要
Title    Architectural and Structural Design of a school  in Xishan                                               
Abstract
Architectural and structural design of a laboratory building in  Xishan vocational school was finished in this paper. Firstly, given the architectural layout, usage function, and the characteristics of the design, the architectural scheme is determined with the help of related information and architectural design code. And the main ichnography, stereograph and profile construction drawings were finished;Secondly, on the basis of the architectural design, the structural designs of a floor slab and a frame as well as a major staircase are accomplished. Meanwhile, the corresponding structural construction shop drawings are drew; Finally, compared with the computer results with the help of the software PKPM, the error is checked and analyzed. Utilizing the data resulted from PKPM, the foundation design of the structure was accomplished and the foundation construction drawings are also drawn.
Keywords  Frame structure; Architecture design; Structure design; Earthquake effect; Foundation design; PKPM software
目    次
1 绪论    2
2 建筑设计说明    2
2.1 建筑设计原则    2
2.2 建筑略图    3
3 结构设计说明    4
3.1 结构设计与分析概述    4
3.2 设计内容    5
3.3 设计准备    5
4 四层楼盖设计    6
4.1 设计资料    6
4.2 四层楼盖结构平面布置图    6
4.3 板的设计    6
4.4  次梁的设计    14
5 框架结构计算    19
5.1 结构布置及计算简图的确定    19
5.2 荷载计算    22
5.3 内力计算    26
5.4 内力组合    43
5.5 截面设计    54
5.6 PKPM电算校核    65
6 楼梯设计    66
6.1 设计资料    66
6.2 楼梯结构设计    67
7 基础设计    70
图7.1 基础平面布置图    71
7.1 设计资料    71
7.2 基础设计    71
结  论    78
致  谢    79
参考文献80
1 绪论
本工程为锡山职业学校实验楼的建筑和结构设计。建筑面积约4800m2,采用钢筋混凝土框架结构,共4层。
场地处于锡山郊区,周围地貌形态单一,地势较为平坦,场地土类型为中软场地土,建筑场地类别为Ⅲ类。建筑结构安全等级为2级,三级框架,抗震设防烈度为7度。
根据地质勘测报告,场地范围内各层土层位基本稳定,地基土均匀性较好,地基基础设计等级为丙级,场地地形、地貌及岩石土层分布如下:(1)表层为杂填土,厚度0.5m,。(2)灰黄色粉质粘土,厚度4m,该层为主要基础持力层,承载力特征值fak=216kpa。(3)粉砂夹粉质粘土,厚度大于10m,承载力特征值fak=210kpa。地下水位位于自然地面下1.9m处。 锡山职业学校实验楼的建筑与结构设计:http://www.youerw.com/gongcheng/lunwen_14106.html
------分隔线----------------------------
推荐内容