毕业论文

打赏
当前位置: 毕业论文 > 材料科学 >

碳纤维增强环氧树脂复合材料的制备与力学性能研究

时间:2018-05-08 17:12来源:毕业论文
固化剂对复合材料的力学性能影响不明显,其中15%的固化剂含量所得到的复合材料在固化效果上更好;碳纤维布铺层层数越多,力学性能表现越好,平均每增加一层碳纤维布

摘要: 本课题研究的是碳纤文增强环氧树脂的制备与力学性能测试,在试验中,通过改变不同的固化剂含量、碳纤文布铺层数、碳纤文的预处理以及不同纤文增强对实际样品力学性能的影响。本课题是对复合材料的的冲击和弯曲性能进行研究,实验结果表明:固化剂对复合材料的力学性能影响不明显,其中15%的固化剂含量所得到的复合材料在固化效果上更好;碳纤文布铺层层数越多,力学性能表现越好,平均每增加一层碳纤文布,冲击性能提高8.46%,弯曲性能提高26.01%;由于碳纤文自身耐酸耐碱,预处理对复合材料的力学性能表现不太明显。22512
毕业论文关键词:碳纤文;环氧树脂;弯曲性能;冲击性能
Research on the preparation  of carbon fiber reinforced epoxy resin  composites and the mechanical properties
Abstract:This research is a test about the preparation and mechanical properties of carbon fiber reinforced epoxy resin. In the experiment, by changing the content of different curing agents, carbon fiber layer,pretreatment of carbon fiber , the different mechanical properties of fiber-reinforced for actual samples. The topic is a study  about the impact of the composite material and bending performance ,the experiments show that: Curing agent is not obvious influence on the mechanical properties of composite materials,15% of the content of curing agent of composite material on the curing effect is better ;The more about carbon fiber cloth layer number, the better about mechanical performance , A layer of carbon fiber sheet , the average impact properties increased by 8.46%, the flexural performance increased by 26.01%;Carbon fiber acid and alkali resistant, pretreatment of composite material mechanics performance is not obvious.
Key  word: the carbon fiber ;epoxy resin ;the bending performance ;the impact properties
目录
1.绪论    1
1.1 碳纤文材料    1
1.1.1碳纤文材料的发展及用途    1
1.1.2碳纤文的制备及处理    1
1.1.3碳纤文的结构特点和性质    2
1.1.4碳纤文的未来发展    3
1.2 环氧树脂的发展研究    3
1.2.1 环氧树脂生产的国内现状    3
1.2.2 几种不同的环氧树脂    4
1.3 环氧树脂固化剂    5
1.3.1 环氧树脂固化剂T31的结构特征    5
1.3.2 T31固化剂的制备新工艺    5
1.3.3 环氧树脂固化剂的现状与发展    6
1.4 复合材料研究    6
1.4.1 复合材料的概况    6
1.4.2 复合材料的基本性质    7
1.4.3 复合材料的特性    7
1.4.4 复合材料的应用    8
1.5 本课题研究的目的与意义    9
1.5.1 实验的目的    9
1.5.2 实验的意义    9
2.实验材料与实验方法    9
2.1 复合材料的成型工艺    9
2.1.1 模压成型工艺    9
2.1.2 缠绕成型工艺    10
2.1.3 拉挤成型工艺    11
2.1.4 复合材料的其他成型工艺    12
2.2 手糊制备碳纤文增强环氧树脂基复合材料    13
2.2.1 实验仪器    13
2.2.2 实验步骤    13
2.3 碳纤文增强复合材料基复合材料的弯曲性能研究    14
2.3.1  实验的设备与原理    14
2.3.2  实验步骤    14
2.4  碳纤文增强复合材料基复合材料的冲击性能研究    16
2.4.1  实验的设备与原理    16 碳纤维增强环氧树脂复合材料的制备与力学性能研究:http://www.youerw.com/cailiao/lunwen_15184.html
------分隔线----------------------------
推荐内容